What will damage a car engine

[Anthonyvomia]

Beginning in the 1770s, many people tried to make cars that would run on steam. Some early steam cars worked well, and some did not. Some were fire pumpers that moved by themselves, and others were small locomotives with road wheels. Beginning in the 1880s, inventors tried very hard to make cars that would run well enough to use every day. These experimental cars ran on steam, gasoline, or electricity. By the 1890s, Europeans were buying and driving cars made by Benz, Daimler, Panhard, and others, and Americans were buying and driving cars made by Duryea, Haynes, Winton, and others. By 1905 gasoline cars were more popular than steam or electric cars because they were easier to use and could travel further without adding fuel. By 1910 gasoline cars became larger and more powerful, and some had folding tops to keep drivers and passengers out of the rain.
In reply to by Will Gordon RIP Pistons 04/02/2016 - 17:46 |
 
More information <a href=https://telegra.ph/The-Thrill-of-Ten-Exploring-Cars-with-V10-Engines-05-31>https://telegra.ph/The-Thrill-of-Ten-Exploring-Cars-with-V10-Engines-05-31</a>
 
 
 
The rotary engine has no reciprocating mass, like valves or pistons in a traditional engine. This leads to an incredibly balanced engine with smooth power delivery, and the ability to rev high without concern of things like valve-float.
Journalist • Thomas Duthois.
The actual term is Hydrostatic Lock , which has been shortened to hydrolock. This happens when too much water enters the combustion chamber.
The best way to destroy a car engine is by draining oil from your car and pouring some sodium silicate solution into the engine through the oil fill. Make sure to keep quite a distance from the car.
Fuel Choice : Avoid using synthetic oils, as they can leave deposits that can damage the apex seals. Instead, opt for high-quality conventional oils or consider using a mix of 2-stroke oil and gasoline to help lubricate the apex seals. Oil Injection Modification : Some owners choose to modify the oil injection system to use TC-W outboard oil, which can reduce oil consumption and improve overall lubrication.